Zigbee CV LED Driver Technology

How Zigbee constant voltage drivers bring smart home and app control to LED strip, and how to choose between mains drivers and low-voltage receivers.

Zigbee LED controller with Zigbee wall panel and remote

Overview

What is a Zigbee CV LED driver?

Zigbee is an open global wireless standard for low-power smart home and building devices. A Zigbee constant voltage (CV) driver powers 12V or 24V LED strip and has a Zigbee radio built in, so the strip can be switched, dimmed and colour controlled from a smartphone app, a Zigbee remote or wall panel, or a voice assistant, with no control wiring.

Our range has two types. The Lifud LF-GAZ150 is a 150W mains driver with a 24V output and Zigbee control in one unit, with a 2-channel tuneable white version. The MiBoxer FUT-Z series are Zigbee 3.0 receivers that fit between a 12–24V power supply and the strip, in dimming, CCT, RGB, RGBW and RGB+CCT models.

App control with the Tuya Smart app through a Zigbee gateway
Voice control via the gateway with popular voice assistants
Self-healing Zigbee 3.0 mesh: each driver extends the network
Single colour, CCT, RGB, RGBW and RGB+CCT control
Flicker-free dimming to IEEE 1789 on the LF-GAZ150

Zigbee CV range at a glance

Brands: Lifud, MiBoxer
Protocol: Zigbee 3.0, 2.4GHz mesh
Mains driver: 150W, 24V, 6.25A
Receivers: 12–24VDC in, up to 12A
Channels: 1 to 5
Colour: Dim, CCT, RGB, RGBW, RGB+CCT
Control: App, remote, panel, voice
Needs: Zigbee gateway for app/voice

Request a Quote Technical Enquiry

The technology

How Zigbee control works

A Zigbee gateway (or hub) creates the network and connects it to your WiFi router, so the Tuya Smart app and voice assistants can send commands from anywhere.

Each mains-powered driver acts as a router in the Zigbee 3.0 mesh, passing messages on to its neighbours. Adding drivers extends the range, and messages find another path if one device is out of reach.

The driver holds a steady 12V or 24V output and dims each channel by PWM. Zigbee remotes and wall panels can also be paired to control drivers directly.

Simplified illustration: the app reaches the drivers through the gateway, commands hop between drivers across the mesh, and a paired remote can control them directly.

Control options

Zigbee compared with other wireless control

How Zigbee compares with the other wireless ways to control LED strip.

Feature	Zigbee 3.0	Casambi	WiFi	RF 2.4GHz
Network	Low-power mesh	Bluetooth mesh	Each device on the router	Remote to receiver
Gateway	Needed for app and voice	Not needed	Not needed	Not needed
App and voice	Yes, via gateway	Casambi app	Yes	Only via a gateway
Smart home integration	Strong, open standard	Casambi ecosystem	App-dependent	Limited
Best for	Smart homes and larger installations	Professional retrofit projects	A few devices at home	Simple, low-cost control

Our range

Zigbee CV drivers and receivers compared

Choose a mains driver for a neat all-in-one installation, or a receiver to add Zigbee to an existing power supply.

Model	Type	Input	Output	Control
Lifud LF-GAZ150B6250-24	Mains driver	220–240VAC	24V, 0–6.25A, 150W	Single colour, dim to off
Lifud LF-GAZ150 (suffix A)	Mains driver	220–240VAC	24V, 150W, 2 channels	Tuneable white (CCT)
MiBoxer FUT036Z	Receiver	12–24VDC	1 channel	Dimming
MiBoxer FUT035Z	Receiver	12–24VDC	2 channels	CCT
MiBoxer FUT037Z	Receiver	12–24VDC	3 channels	RGB
MiBoxer FUT038Z	Receiver	12–24VDC	4 channels	RGBW
MiBoxer FUT039Z	Receiver	12–24VDC	5 channels	RGB+CCT

FUT-Z receivers handle up to 12A in total. The LF-GAZ150 is 92% efficient, flicker free to IEEE 1789 and has a 5 year warranty.

Benefits

Advantages of Zigbee CV LED drivers

Why Zigbee is a popular choice for smart LED strip lighting.

Smart home ready

An open standard that works with Zigbee gateways, apps and voice assistants.

Self-healing mesh

Every mains-powered driver relays messages, extending range and finding new routes.

App and voice control

Scenes, schedules and colour control from the Tuya Smart app, or by voice.

Full colour range

Dimming, tuneable white, RGB, RGBW and RGB+CCT models.

No control wiring

Only power is needed at each driver; control is wireless.

Low power

Zigbee is designed for low-power devices, so battery remotes and sensors last.

Selection & set-up

Choosing and installing a Zigbee CV driver

Choose the type: a mains driver for all-in-one installations, or a receiver to use with a separate 12V or 24V power supply.
Match the channels: 1 for single colour, 2 for CCT, 3 for RGB, 4 for RGBW and 5 for RGB+CCT.
Size the load: add up the strip load (W/m × length) with at least 20% headroom, within the driver or receiver rating.
Add a gateway: install a Zigbee gateway for app and voice control, and pair each driver to it.
Plan the mesh: keep drivers within range of each other or the gateway, and avoid enclosed metal housings.
Add switches: pair Zigbee remotes or wall panels for local control.

Related technology and products

Compare other wireless controls and complete the installation:

Ask an Engineer

3.0

Zigbee version

2.4GHz

Radio band

1–5

Output channels

150W

Mains driver power

Where Zigbee CV drivers are used

Wherever LED strip needs to join a smart home or building system.

Smart homes

Kitchen, cove and garden strip on the same app as other smart devices.

Apartments and hotels

Room lighting scenes controlled from an app or panel.

Retail

Shelf and display strip on schedules and scenes.

Offices

Feature and indirect lighting linked to building systems.

Signage and light boxes

Illuminated signs switched and dimmed on a timer.

Retrofit

Smart strip lighting without running new control cables.

FAQ

Zigbee CV driver questions

A Zigbee constant voltage (CV) driver powers 12V or 24V LED strip and has a Zigbee radio built in, so the strip can be switched, dimmed and colour controlled wirelessly from a smartphone app, a Zigbee remote or wall panel, or a voice assistant, with no control wiring.

Yes, for app and voice control. A Zigbee gateway or hub joins the drivers into a network and links it to your WiFi router, so the Tuya Smart app and voice assistants can reach them. Zigbee remotes and wall panels can also be paired to control drivers directly.

Zigbee 3.0 is the current version of the Zigbee standard. It brings the earlier application profiles together into one, so certified devices from different manufacturers can join the same network. It runs in the 2.4GHz band on the low-power IEEE 802.15.4 radio standard.

Mains-powered Zigbee devices, including LED drivers, act as routers that pass messages on to other devices. Each driver added to the network therefore extends its coverage, and messages can take another route if one device is out of range.

A mains Zigbee driver such as the Lifud LF-GAZ150 combines the power supply and Zigbee control in one unit. A low-voltage Zigbee receiver such as the MiBoxer FUT-Z series fits between a separate 12V or 24V power supply and the strip, and offers dimming, CCT, RGB, RGBW and RGB+CCT models.

Zigbee CV LED Driver Technology